Product List

(Total 100 Products )
FZ35-70 single-RAM
2FZ35-70 dual-RAM blowout preventer
Working diameter: 346.1mm
Normal working pressure: 70Mpa
Upper/lower flange gasket ring: BX-159
Flange connecting ...
LSB2*3 solution feed pump is the centrifugal pump specially designed by our company for LW series centrifugal machinery.It is applicable to well-drilling and well-fixing mud fluid ...
Main Features
Power end
The frame is a welded structure with steel plate, high strength, rigidity and light weight.

Adopting herringbone gear drive, running smoothly.
The ...
Working diameter:346.1mm
Normal working pressure:70Mpa
Upper/lower flange gasket ring:BX-159
Flange connecting bolt:20-M48 * 3
Side outlet diameter:78mm(3 1/16")
Flange ...
Characteristics:
IADC code: M221
Blades qty.: 5
Nozzles qty: 5
Total cutters: 40
Primary cutter size: 3/4"(19mm) standard gauge length: 4.5"(11.43cm) junk slot area: 42.1 ...
Main Features
Power end
The frame is a welded structure with steel plate, high strength, rigidity and light weight.

Adopting herringbone gear drive, running smoothly.
The ...
Casing bushing is combined by bushing body and insert bowls. It is suitable for handling casing less than 30 in. There are two types: Solid and split. CU and CUL are solid bushing, ...
With middle sealed structure and axial floating compensation, there series of gear motors feature high output voltage, impact resistant, low noise, high efficiency and reliable ...
FM series of air motors owns wide application. It is suitable for such occasions as stepless speed change, frequent startup, regular reversing, high temperature, high humidity, ...
Washover pipes are special tools that can mill seized drilling tools in well and troubleshoot under well accidents. This kind of washover pipe has two-stage synchronized thread and ...
Ram type BOP is simple and compact and is suited for land and platform applications. The ram in the BOP is pressure energized. The well pressure acts on the ram to increase the ...
Casing Spiders
The Hinged Casing Spider has a capacity of 200 or 500 Tons, Without insert bowls, will handle 185/8 and 20 inch casing, Insert bowls are available, and alone or in ...
FP sealed anti-spraying box is widely used to prevent mud spraying and contaminating the drill platform during breaking-out and making-up of drilling tools. It is simple, safe, ...
The device is a special tool for clamping drill pipe in mouse when making-up and breaking-out the drill pipe in drilling operation. The most obvious feature of it is ...
Kill manifold is an important equipment to carry out the pressure control in oil/gas well. It is used to pump the kill fluid into well so as to kill well and realize pressure ...
Drilling liquid agitator mixes the drilling liquid continuously to mix the drilling liquid evenly and make the cuts suspend in the drilling liquid. ZJC drilling liquid agitator ...
Ground Control
During the cause of test, fluid should be controlla-bly guided into separator and burner after flowingthrough drilling rod or tubing, the assembly is named ...
Design Features:
Choke manifold is a necessary equipment to carry out the pressure control in the oil/gas well. It is used to control the pressure in the well in order to avoid ...
Roller kelly bushing is a necessary tool for drilling. It is to drive kelly spinner by matching with master bushing. Through rotating of four rollers, the friction between rollers ...
Usage
Choke manifold control console, as a control assembly in hydraulic choke manifold, can remote-control the open/close of hydraulic choke valve for a long distance and the ...
The control system for surface mounted BOP stacks is critical for well control. The system is integrated with mechanical, electrical, hydraulic, pneumatic, information technology. ...
normal working pressure: 70Mpa
upper flange working pressure:? 180mm
gasket ring: BX-156
connecting bolt: 12-M39 * 3
lower working diameter:? 346.1mm
gasket ring: BX-159 ...
Sort Description Upper Connection Part Lower Connection Part Type
1 Kelly cross-over sub Kelly Drill pipe A or B
2 Drill pipe cross-over sub Drill pipe Drill pipe A or B
3 ...
Bit Breaker Adapter Plates are located in the Master Bushing drive pin holes and provide a 139/16 inch square to accommodate Bit Breakers. They are used for MPCH, MSPC, MDSP and ...